2GE+CATV+WiFi 2.4/5G XPON ONU

Artículo No.: WK-3802AWC
Los dispositivos terminales 2GE+WiFi5+USB3.0+CATV GPON/EPON ONT WiFi Mesh están diseñados para satisfacer la demanda de servicios FTTH y triple play de los operadores de redes fijas. Estas cajas se basan en la tecnología madura Chipset (Realtek), que tiene una alta relación entre rendimiento y precio, y también en la tecnología de WiFi5 (doble banda), capa 2/3 y WiFi EasyMesh. Admite la gestión completa de dispositivos ONT a través de WOLCK OLT. Son altamente confiables y fáciles de mantener, con calidad de servicio garantizada para diferentes servicios. Y cumplen totalmente con los reglamentos técnicos como IEEE802.3ah, ITU-T G.984.x y los requisitos técnicos de los equipos GPON de China Telecom.
Descripción Caracteristicas Parámetro
Descripción

Gigabit Fiber XPON CATV ONT

XPON | Gigabit-LAN | CATV RF | USB3.0


EasyMesh: Smart, Extended Coverage Home WiFi


Support IPv6 and MU-MIMO Technology

Say goodbye to network lag, multiplayer online without lag


AC1200 Dual Gigabit Interfaces for Gigabit Broadband Access Applications


CATV with AGC

Remote Control CATV On/Off

Caracteristicas
  • Modo dual (puede acceder a gpon / epon olts).
  • Plug and play, cuenta con detección automática, configuración automática y actualización automática de firmware, etc.
  • Configuración remota integrada de OAM y función de mantenimiento.
  • Admite funciones QinQ VLAN ricas y funciones de multidifusión IGMP Snooping.
  • Totalmente compatible con OLT basado en el chipset Broadcom / PMC / Cortina.
  • Admite la función 802.11n WiFi (2T2R).
  • Soporte NAT, función de firewall.
  • Soporta doble pila IPv4 e IPv6.
  • Soporta protocolo SIP
Parámetro
 Hardware Parameter
Dimension 178mm×120mm×30mm(L×W×H)
Net weight 0.28Kg
Operating condition Operating temp: 0 ~ +55°C
Operating humidity: 10 ~ 90%  (non-condensed)
Storing condition Storing temp: -30 ~ +60°C
Storing humidity: 10 ~ 90%  (non-condensed)
Power adapter DC 12V,1.5A, external AC-DC power adaptor
Power supply ≤12W
Interface 2GE+WiFi5+CATV+USB3.0
Indicators PWR, PON, LOS, WAN, LAN1, LAN2, 2.4G, 5G, CATV, USB
   
 Interface parameter
PON interface
  • 1 XPON port(EPON PX20+ & GPON Class B+)
  • SC single mode, SC/APC connector
  • TX optical power: 0+4dBm
  • RX sensitivity: -27dBm
  • Overload optical power: -3dBm(EPON) or -8dBm(GPON)
  • Transmission distance: 20KM
  • TX wavelength: 1310nm
  • RX wavelength: 1490nm, 1550nm(CATV)
CATV  interface
  • Optical receiving wavelength: 1550±10nm
  • RF frequency range: 471000MHz
  • Optical power input range: 0-3dBm
  • RF output impedance: 75Ω
  • RF output level: 5060dBuV(0-3dBm optical input with AGC)
  • MER: ≥32dB(-3dBm optical input)
WiFi interface
  • Compliant with IEEE802.11b/g/n/ac
  • 2.4GHz Operating frequency: 2.400-2.483GHz
  • 5.0GHz Operating frequency: 5.150-5.825GHz
  • WiFi: 2.4GHz( 2T2R ), 5.8GHz( 2T2R ), 5dBi antenna, support: multiple SSID
  • TX power: 11n–22dBm/11ac–24dBm
LAN interface 2*GE,Auto-negotiation,RJ45 ports
USB interface USB3.0 For Printer&Storage
 Function Data
Management
  • OAM/OMCI, Telnet, WEB, TR069
  • Support full management of ONT functions by VSOL OLT
Data Service Functions
  • Full speed non-blocking switching
  • 2K MAC address table
  • 64 full range VLAN ID
  • Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc
  • Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
  • Support auto polarity detection of Ethernet ports (AUTO MDIX)
  • Integrated IEEE802.1p QoS with four level priority queues
  • Support IGMP v1/v2/v3 snooping/proxy and MLD v1/v2 snooping/proxy
  • Support bridge, router and bridge/router mixed mode
  • IP address assignment: dynamic PPPoE/DHCP Client and static IP
Wireless
  • Integrated 802.11b/g/n/ac(WIFI5)
  • Support Easymesh protocol
  • Authentication: WEP/WAP-PSK(TKIP)/WAP2-PSK(AES)
  • Modulation type: DSSS, CCK and OFDM
  • Encoding scheme: BPSK, QPSK,16QAM and 64QAM
investigación